50
Chapter 1 / Section 3 Using Special Features for Improved Photography
If you select
// / /
Press the buttons to select a mode.
Press the button.
White Balance settings are complete.
Press the button.
The Shooting Menu closes and the setting value is
displayed on the upper left of the screen.
This setting will be used for shooting until you change it.
Buttons used here
• In Auto Mode, if the subject has limited white area, White Balance may not adjust properly. In this kind of
situation add a white object to the composition.
• If you have set the camera to Daylight, Overcast, Tungsten or Fluorescent, the flash is set to Flash Off.
To Next Page
Loading...
