87
Chapter 1 / Section 5 Deleting Still Images and Movies
Protecting All Still Images
To protect all your still images (or movies), follow
the steps below.
Turn the Mode Dial to (Playback Mode).
Press the button.
The Playback menu is displayed.
Press the button to select [PROTECT]
and then press the button.
Press the button to select [ALL FILES].
Confirm you are choosing [SELECT] and
then press .
When set to Protect, the Protect symbol appears in
the upper left of the screen.
Buttons used here
• To remove protection from all your still images (or movies), select [RELEASE] in step
.
• You can remove protection from all or multiple images (or movies) at once.
• To remove protection for one still image at a time, see p.85.
• To remove protection of selections made on the Thumbnail Display screen, see p.88.
To Next Page
Loading...
