62
Chapter 1 / Section 3 Using Special Features for Improved Photography
Press the shutter button.
Three consecutive shots are taken, with the specified
Exposure Compensation value as the standard,
at -0.5EV, +/-0, and +0.5EV.
After shooting, the three shots are displayed on the
LCD Monitor. They are from the left, -0.5EV, the
standard compensation value, and +0.5EV.
This setting will be used for shooting until you change it.
• For how to change the Exposure Compensation see p.47.
• For how to change the White Balance see p.49.
To Next Page
Loading...
