Paper and Other Media
16
Slide the side guides by pinching their green clips fully in, and then adjust the
end guide to the paper size being loaded by pinching the guide's green clip.
C Slide the green switch on the front of the tray to the type of paper to be
loaded. When loading paper of 75 g/m
2
, 20 lb., or thicker, slide the switch
to the right.
D Load the new paper stack print side up, making sure the paper is flush
against the paper guides.
Pinch the green clips of the paper guides while adjusting the paper guides to
the size of the paper you are loading.
To Next Page
Loading...
Need help?
General
