To Print
103
4
• About the certificate
• If you start Web Printing Tool, a dialog box about issuing the certificate ap-
pears. Click [Run].
• Select the [Always trust content from this publisher.] check box. No warning
will be shown after starting Web Printing Tool.
• If you click [Cancel], Web Printing Tool will not start. Close the Web brows-
er, and then restart Web Printing Tool.
• The certificate becomes effective after the [Security] setting under [Advanced]
on the Java control panel is set as follows:
• Allow user to grant permissions to signed content
• Allow user to grant permissions to content from an untrusted authority
• The default Java Runtime setting is effective.
•Compatible languages:
Web Printing Tool does not change the language settings of this machine. If
necessary, change the language using the Web browser.
Note
❒ Make the JavaScript, and Java applet following settings (required):
•Enable JavaScript.
• Install Java Runtime Environment (JRE 1.5 or later version.) and enable
applet.
• Pop up blocking may not be set, depending on the Web browser you are
using. If this is the case, the Help file will not be properly displayed.
❒ If you are using a proxy server, change the Web browser settings. Contact
your administrator for information about the settings.
❒ We recommend using Web Printing Tool in the same network.
❒ You cannot access to the machine from outside the firewall.
❒ When using the machine under DHCP, the IP address may be automatically
changed by the DHCP server settings. Enable DDNS setting on the machine,
and then connect using the machine's host name.
❒ Alternatively, set a static IP address to the DHCP server.
❒ When you are using Firefox, fonts and colors may be different, or tables may
be out of shape.
❒ When using a host name under Windows Server 2003 with IPv6 protocol, per-
form host name resolution using an external DNS server. The host file cannot
be used.
To Next Page
Loading...
Need help?
General
