Printing from the Print Job Screen
83
3
Stored Print
Use this function to store a file in the machine, and then print it from the com-
puter or the machine's control panel later.
Jobs are not deleted after they are printed, so the same job need not be re-sent in
order to print multiple copies.
Important
❒ A Stored Print file cannot be stored if:
• the total number of Sample Print, Locked Print, Hold Print, and Stored
Print files in the machine is over 100. (The maximum number varies de-
pending on the volume of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the machine contain over 3,000 pages in total.
Note
❒ If a Stored Print file has not been stored properly, check the error log on the
display panel.
❒ Even after you turn off the machine, stored documents remain. However, the
[Auto Delete Temporary Print Jobs] or [Auto Delete Stored Print Jobs] settings are
applied first (see “Printer Features”, General Settings Guide).
❒ If the application has a collate option, make sure it is not selected before send-
ing a print job. By default, Stored Print jobs are automatically collated by the
printer driver. If a collate option is selected from the application's Print dialog
box, more prints than intended may be produced.
❒ You can optionally set a document title and a password of a Stored Print file.
For details about a password setting, see the printer driver Help.
❒ For details about the error log on the display panel, see p.93 “Checking the
Error Log”.
❒ For details about the [Auto Delete Temporary Print Jobs] and [Auto Delete Stored
Print Jobs], see “Printer Features”, General Settings Guide.
Reference
p.93 “Checking the Error Log”
“Printer Features”, General Settings Guide
To Next Page
Loading...
Need help?
General
