Ricoh CX6 - Protect

97
4
Playback Menu
• The following table shows the approximate time required for skew correction.
Image Size Correction time Image Size Correction time
j 4 : 3 F
Approx. 7 seconds
e 4 : 3 F
Approx. 5 seconds
j 4
: 3 N
Approx. 7 seconds
c 4 : 3 F
Approx. 4 seconds
i 3
: 2 F
Approx. 7 seconds
a 4
: 3 F
Approx. 2 seconds
g 1
: 1 F
Approx. 6 seconds
z 4 : 3 F
Approx. 1 seconds
g 16
: 9 F
Approx. 6 seconds
•
When scene mode is set to [Skew Correct Mode], you can shoot an image and
then immediately correct any skew in the image (GP.54).
Protect
[Protect] allows you to protect files from
being accidentally deleted.
If [1 File] is selected, you can protect or
unprotect the file selected by pushing the
ADJ./OK button NF.
If [Select All] or [Cancel All] is selected, you
can protect or unprotect all files.
Selecting Multiple Files
Select [Sel. Multiple] to change the protect status of multiple
individual files or of all files in a selected range.
To select multiple individual files:
1
Select [Sel. Indiv.] and press the ADJ./OK button.
2
Select a file and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying a
range of files.
• If you selected a file by mistake, you can deselect it by selecting the
file and pressing the ADJ./OK button.
• Select all files you want to protect.
3
Press the Fn button.