19
2. Combined Function
Operations
Changing Modes
Note
❒ You cannot switch modes in any of the following situations:
• When scanning a fax message for transmission
• During immediate transmission
• When accessing User Tools
• During On hook dialing for fax transmission
• While scanning an original
❒ The copying screen is displayed as default when the power is turned on. You
can change this default setting. See p.28 “Function Priority”.
ABU201S
StellaC2_AEzen_F_FM.book Page 19 Monday, December 22, 2003 2:15 PM
To Next Page
Loading...
