x Clearing Misfeeds
75
4
x
xx
x
Clearing Misfeeds
CAUTION:
Important
❒ When clearing misfeeds, do not turn off the power switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper inside the ma-
chine.
❒ If paper misfeeds occur repeatedly, contact your service representative.
Note
❒ More than one misfeed area may be indicated. If this is the case, check every
applicable area. Refer to the following charts: A, P, Y.
❒ You can find a sticker explaining how to remove misfed paper inside the right
cover.
❒ When the machine instructs you to reset originals, reset them in the feeding
position. The display will show you the number of originals to return.
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.
StellaC2_AEzen_F_FM.book Page 75 Monday, December 22, 2003 2:15 PM
To Next Page
Loading...
