Ricoh DSm415pf User Manual

Changing the Paper Size
79
4
When loading 8
1
/
4
" × 14"L or
8
1
/
2
" × 14"L size paper
A Pull the back fence off from
the tray.
B Place it in the corner pocket on
the left.
D
DD
D
While pressing the release lever,
adjust the side fences.
E
EE
E
Push the metal plate down, and
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.
F
FF
F
While pinching the release lever,
adjust the side and back fences to
the new paper size.
Important
❒ When loading small quantities
of copy paper, be careful not to
squeeze in the side fence too
much or paper will not feed in
properly.
G
GG
G
Push the paper tray in until it
stops.
StellaC2_AEzen_F_FM.book Page 79 Monday, December 22, 2003 2:15 PM

Ricoh DSm415pf Specifications

General

Brand	Ricoh
Model	DSm415pf
Category	All in One Printer
Language	English