94
MORE ON PLAYBACK
Tip: Selecting Ranges
To select one or more ranges consisting of two images and all
photographs between them, press the ADJ. lever in and follow
the steps below:
3.1 Press
!, ", #, or $ to high-
light the first image and press
C/D to select. The se-
lected image is marked with an
icon. If you selected the wrong
image, press DISP. and try again.
3.2 Press !, ", #, or $ to high-
light the last image and press
C/D to select. The se-
lected image and other images
in the selected range will be
marked with icons.
Repeat Steps 3.1–3.2 to select additional ranges, or press the
ADJ. lever in to select or deselect individual photographs as
described in Step 3.
4
Press the Fn2 button.
A message will be displayed while the camera pro-
tects the selected files. The camera will then return
to normal playback.
Protecting or Removing Protection from All Files
To protect all files, select Protect,
highlight Select All and press
C/D. To remove protec-
tion from all files, highlight Cancel
All and press C/D.
To Next Page
Loading...
