35
FIRST-TIME USER? READ THIS.
Tip: Selecting Ranges
To select one or more ranges consisting of two images and all
photographs between them, press the ADJ. lever in and follow
the steps below:
3.1 Press
!, ", #, or $ to high-
light the first image and press
C/D to select. The se-
lected image is marked with
a D icon. If you selected the
wrong image, press DISP. and
try again.
3.2 Press !, ", #, or $ to high-
light the last image and press
C/D to select. The se-
lected image and other images
in the selected range will be
marked with D icons.
Repeat Steps 3.1–3.2 to select additional ranges, or press the
ADJ. lever in to return to Step 3 and select or deselect indi-
vidual photographs.
4
Press D.
A confirmation dialog will be
displayed.
5
Select Ye s .
Press # or $ to highlight Ye s
and press C/D.
To Next Page
Loading...
