Ricoh GR Digital - Changing the Beep Sound Setting (BEEP SOUND)

127
Changing Camera Settings
3
Setting a Function to the ADJ. dial
(ADJ BTN.SET. 1/2)
The ADJ. dial allows you to display the exposure correction screen and white-
balance setting screen with fewer button operations.
Functions that can be displayed by pressing the ADJ. dial can be assigned to
[ADJ. BTN. SET. 1] and [ADJ. BTN. SET. 2].
To assign a function to either [ADJ. BTN. SET. 1] or [ADJ. BTN. SET. 2], follow
the steps below.
1. Display the setup menu.
For detailed operation, see P.123.
2. Press the " button to select [ADJ.
BTN. SET. 1] or [ADJ. BTN. SET. 2],
and press the $ button then.
3. Press the !" buttons to select
the desired setting.
4. Press the M/O or # button.
5. If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Reference
For how to use the ADJ. dial, see P.65.
Possible Settings (Refer to)
OFF *Setting 2 upon purchase -
ISO *Setting 1 upon purchase P.91
QUALITY (PIC/QUALITY) P.69
FOCUS P. 7 4
IMG SET P. 7 8
METERING P.77
AUTO BKT P.80
CONT MDE P.101
WITH SND P.85