Ricoh GR Digital - Connecting the Camera to Your Computer

161
Installing Software
4
Connecting the Camera to Your Computer
Downloading Images Using RICOH Gate La
After installing the software on your computer, connect your camera
to the computer.
The following explanation is provided assuming that [ORIGINAL]
(default) is selected at [USB CONNECTION] of the camera's Setup
menu (P.138). If [MASS STR] is selected, change it to [ORIGINAL].
1. Make sure the camera power is off.
2. Connect the USB cable to the
USB port of your computer.
3. Connect the USB cable to the
USB terminal of your camera.
Your camera turns on.