162
For Windows XP
The first time you connect your camera to the computer using a USB
cable, the [Found New Hardware Wizard] screen will appear.
1.
Select [Install the software
automatically (Recommended)].
2.
Insert the Caplio Software CD-ROM into the CD-ROM drive
on your computer.
Installation of the WIA Driver automatically starts. If the CD-ROM is
already on your computer when the [Found New Hardware Wizard]
window is displayed, simply click [Next] to start installation.
Reference
For how to turn the camera on/off, see P.29.
Note
By default, the WIA driver is installed in the following location: (Specify the folder if the CD-
ROM is not available.)
My Computer
Local Disk
Program Files
Caplio Software
WIA Driver
To Next Page
Loading...
