Ricoh GR Digital - Changing the Zoom Button Setting (ZOOM BTN. SET.)

145
Changing Camera Settings
3
Setting the AF Auxiliary Light
(AF AUX. LIGHT)
You can set whether to set off the AF auxiliary lamp when shooting
in the Auto Focus mode.
When ON is selected, the AF auxiliary lamp goes on to measure the
focal distance before shooting as required.
1. Display the setup menu.
For the operating procedure, see P.123.
2. Press the " button to select [AF
AUX. LIGHT] and press the $
button.
3. Press the !" buttons to select
[ON] or [OFF].
4. Press the M/O or # button.
5. If the # button was pressed in
Step 4, press the M/O button.
Now you have completed AF auxiliary light setting.
These settings are used until they are changed the next time.
Note
The AF auxiliary lamp goes on when Auto-Focus does not function because of the dark
surrounding area.
When you fully press the shutter button, the AF auxiliary lamp may not go on even if the
surrounding area is dark.