147
Changing Camera Settings
3
Changing the Zoom Button Setting
(ZOOM BTN. SET.)
When you do not use digital zooming, you can assign the exposure
compensation or white balancing function to the zoom button (8/9
button).
To change the zoom button setting, follow the steps below.
1.
Display the setup menu.
For the operating procedure, see P.123.
2.
Press the " button to select
[ZOOM BTN. SET.] and press the $
button.
3.
Press the !" buttons to select
[EXPO. CMP.] or [WHT. BAL.].
If you do not assign any function, select
OFF.
4.
Press the M/O or # button.
5.
If the # button was pressed in Step 4, press the M/O
button.
Now you have completed zoom button setting.
These settings are used until they are changed the next time.
To Next Page
Loading...
