133
Changing Camera Settings
3
Note
• When you are recording to internal memory, file names are assigned just as when
[SEQUENTIAL NO.] is set to [OFF].
• When transferring images to a computer using RICOH Gate La (P.161), designating a file
name same as the one that already exists in the destination folder, the file is renamed
before saving to avoid overwrite problems.
• When an image has been transferred to a computer using a mass storage (P.164), it is
saved as a file named "RIMG****.jpg" (**** indicates the number of the image) even if
[SEQUENTIAL NO] is set to ON.
• When RIMG9999 is reached, no more files can be saved. In this case, move image data
from the SD memory card to the built-in memory of the computer or a storage medium, and
then format the SD memory card.
• The name of the file to be recorded varies with the setting of [COLOR SPACE SETTING] in
the SETUP menu.
Consecutive numbering
Value of COLOR SPACE setting
sRGB AdobeRGB
ON (Continue numbering) R0010001.jpg _0010001.jpg
OFF (Do not continue numbering) RIMG0001.jpg _RIM0001.jpg
To Next Page
Loading...
