139
Changing Camera Settings
3
To change the USB communication system, follow the steps below:
1.
Display the setup menu.
For the operating procedure, see P.123.
2.
Press the " button to select [USB
CONNECTION] and press the $
button.
3.
Press the !" button to select a
value.
4.
Press the M/O or # button.
5.
If the # button was pressed in
Step 4, press the M/O button.
These settings are used until they are changed the next time.
Reference
For how to transfer images using RICOH Gate La, see P.161.
To Next Page
Loading...
