186
If you clicked the [Keep Blocking] button:
Follow the steps below to check to see the Windows Firewall
settings.
1.
Click [Start] and then [Control Panel].
2.
Double-click [Windows
Firewall].
If [Windows Firewall] is not displayed,
click [Switch to Classic Display] at the
upper left of the window.
3.
Click the [Exceptions] tab.
4.
Check that the software is in
[Programs and Services].
5.
Click the [Add Program] button
to add software that uses the
network.
If you clicked the [Ask Me Later] button:
Each time the program is activated, the [Critical Warning about
Windows Security] window appears. Then you can select [Unblock].
To Next Page
Loading...
