Loading the multipurpose feeder
52
Printing
6 Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media.
7 Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) to the
correct value for the print media you loaded.
a Press on the operator panel.
b Press until the appears next to Paper Menu, and then press .
c Press until the appears next to Paper Size/Type, and then press .
d Press until the appears next to MP Feeder Size/Type, and then press .
e Press until the appears next to the media size you loaded, and then press .
f Press until the appears next to MP Feeder
Size/Type, and then press .
g Press until the appears next to the media type you loaded, and then press .
The printer returns to Ready.
Closing the multipurpose feeder
1 Remove print media from the multipurpose feeder.
2 Push the extension tray in.
3 Close the multipurpose feeder cover.
To Next Page
Loading...
