Ricoh InfoPrint 1532

Identifying and linking output bins
58
Printing
Identifying and linking output bins
There is one standard output bin on all printer models. Depending on the model you selected, your output bin capacity is
250 or 500 sheets. If you need additional output capacity, there are several optional output bins available for the printer.
If you have multiple output bins, you can link them into a single output source. Linking output bins lets the printer
automatically switch output to the next available bin.
Output bins available
The following table provides information on standard and optional output bin capability and connectivity.
Note: Not all output bins support every paper and envelope size.
Output
bin name
Each bin accommodates How many
can be
installed on
the printer
Bin is
allowed to
connect with
Illustration of output binPrint media Printer Models
Standard
bin
• 250 sheets
(75 g/m
2
) of
plain paper
• 150 transparencies
• 100 labels
• 25 envelopes
(75 g/m
2
)
Model
I
N/A – one is
standard on
the printer
and located
on top of the
printer
Any of the
options in
combinations
as follows in
this column
Standard
bin
500 sheets
(75 g/m
2
) of plain paper
300 transparencies
200 labels
• 50 envelopes
(75 g/m
2
)
Model
II
Model III
Finisher Sheets of 75 g/m
2
of
plain paper (maximum
number of stapled jobs
is 40)
Model I 500 sheets
Model
II 750 sheets
Model III 750 sheets
Model
I
Model II
Model III
1 1 output
expander
or 1 5-bin
mailbox*
High-
capacity
output
stacker
• 1850 sheets
(75 g/m
2
) of plain
paper
• Envelopes (Capacity
will vary, depending
on the media weight.)
Model I
Model II
Model III
1 1 output
expander*
* See the instructions that came with the option for information on how to install options in relation to each other.