Ricoh L5160 - Inside View

CIP Training L5160/L5130
Throughput
8. Media holding lever (back)
A lever to hold media on the feeding surface. Use this lever when setting media,
dealing with media misfeeds, etc. The media holding lever (front) and media
holding lever (back) work in conjunction with each other.
9. Power inlet 1
A power inlet for supplying power to the pre-heater and cure heater. Connect
the included power cord to the power socket.
10. Power inlet 2
A power inlet for supplying power to the machine. Connect the included power
cord to the power socket.
11. Main power switch
To operate the machine, the main power switch must be on. If it is off, turn the
switch on.
"Turning On the Power".
12. Media sensor
Detects the presence of media.
Inside View
DWT108
1
10
9
6
7
8
43 52