4. Configuration
Ethernet Configuration
Configure the following network settings according to the network environment using the control panel.
• The following table shows the control panel settings and their default values. These items appear in
the [Host Interface] menu.
Setting Name Default
Machine IPv4 Address
• DHCP: On
• IPv4 Address: 11.22.33.44
• Subnet Mask: 0.0.0.0
• Gateway Address: 0.0.0.0
IPv6 Stateless Setting Active
IPsec Inactive
NW Frame Type Auto Select
Effective Protocol
• IPv4: Active
• IPv6: Inactive
• NetWare: Active
• SMB: Active
• Apple Talk: Active
Ethernet Speed Auto Select
LAN Type Ethernet
• If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set
automatically.
• If the printer is already placed on a TCP/IP-capable environment, you can also use
SmartDeviceMonitor for Admin or a Web browser to configure IP address-related settings.
55
To Next Page
