Large capacity tray (LCT)
Paper type and weight Paper size Paper capacity
52–157 g/m
2
(14–42 lb.
Bond)
Thin Paper–Thick Paper
A4
8
1
/
2
× 11
1,000 sheets × 2
52–157 g/m
2
(14–42 lb.
Bond)
Thin Paper–Thick Paper
*1
8
1
/
2
× 11
A4
1,000 sheets × 2
*1
To load paper any of the sizes specified above, contact your service representative.
Paper Thickness
Paper Thickness
*1
Paper weight
Thin Paper
*2
52–59 g/m
2
(14–15 lb. Bond)
Plain Paper 1 60–74 g/m
2
(16–20 lb. Bond)
Plain Paper 2 75–81 g/m
2
(20 lb. Bond)
Middle Thick 82–105 g/m
2
(21–28 lb. Bond)
Thick Paper 106–157 g/m
2
(28–42 lb. Bond)
*1
Print quality will decrease if the paper you are using is close to the minimum or maximum weight.
Change the paper weight setting to thinner or thicker.
*2
Depending on the type of thin paper, the edges may crease or the paper may be misfed.
• Certain types of paper, such as translucent paper or OHP transparencies, may produce noise
when delivered. This noise does not indicate a problem and print quality is unaffected.
•
The paper capacity described in the tables above is an example. Actual paper capacity might be
lower, depending on the paper type.
• When loading paper, make sure the stack height does not exceed the limit mark of the paper tray.
• If multiple sheet feeding occurs, fan sheets thoroughly or load sheets one by one from the bypass
tray.
Recommended Paper
159
To Next Page
Loading...
