When Data Cannot Be Sent Due to a Problem with the Destination
Message Causes Solutions
"Some invalid destination(s)
contained. Do you want to
select only valid
destination(s)?"
The specified group contains
fax destinations, e-mail
destinations, and/or folder
destinations, either of which
are incompatible with the
specified transmission
method.
In the message that appears at each
transmission, press [Select].
"SMTP authentication email
address and administrator
email address mismatch."
The SMTP authentication e-
mail address and the
administrator's e-mail
address do not match.
For details about how to set SMTP
authentication, see "File Transfer",
Connecting the Machine/ System
Settings.
When the Machine Cannot Be Operated Due to a Problem with the User
Certificate
Message Causes Solutions
"The destination cannot be
selected because its
encryption certificate is not
currently valid."
The user certificate
(destination certificate) has
expired.
A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide.
"The group destination
cannot be selected because
it contains a destination with
a encryption certificate that
is not currently valid."
The user certificate
(destination certificate) has
expired.
A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide.
"Transmission cannot be
performed because the
encryption certificate is not
currently valid."
The user certificate
(destination certificate) has
expired.
A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide.
10. Troubleshooting
228
To Next Page
Loading...
