Message Causes Solutions
"Classification Code is
incorrect."
The classification code is not
supported with the printer
driver.
Select [Optional] for classification
code. For details about how to specify
classification code settings, see
"Configuring Classification Codes",
Print.
"Duplex has been
cancelled."
Duplex printing was
canceled.
• Select the proper paper size for
the duplex function. For details
about paper, see "Specifications
for the Main Unit", Maintenance
and Specifications.
•
Change the setting for "Apply
Duplex" in [Tray Paper Settings]
to enable duplex printing for the
paper tray. For details about
setting "Apply Duplex", see "Tray
Paper Settings", Connecting the
Machine/ System Settings.
"Exceeded max. pages.
Collate is incomplete."
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
Reduce the number of pages to print.
"Output tray has been
changed."
The output tray was
changed because the paper
size of the specified output
tray is limited.
Specify the proper output tray.
"Print overrun." Images were discarded
while printing.
Select a lower resolution on the printer
driver. For details about how to
change the resolution setting, see the
printer driver Help.
"Punch has been cancelled." Punch printing was
canceled.
Check the paper orientation, print
orientation, and then punch position.
Certain settings can produce print
results that might not be as expected.
10. Troubleshooting
200
To Next Page
Loading...
