Ricoh MP 401 spf - Specifying a File Type

Press [User Name], and then select a user name. To specify an unregistered user name, press
[Manual Entry], and then enter the name. After specifying a user name, press [OK].
• File Name
Press [File Name], enter a file name, and then press [OK].
•
Password
Press [Password], enter a password, and then press [OK]. Re-enter the password for
confirmation, and then press [OK].
8. Press [OK] twice.
9. If necessary, press [Send Settings] or [Original] to configure settings for resolution and
scan size.
10. Press the [Start] key.
Checking Stored Files Selected from the List
This section explains how to preview a file selected from the list of stored files.
1. Press [Send Settings].
2. Press [ ] four times, and then press [Select/Manage Stored File].
3. From the list of stored files, select the file you want to check.
You can select more than one file.
4. Press [Preview].
6. Scan
116