Ricoh MP 4054 Series User Guide

Copying onto Envelopes
This section describes how to copy onto regular size and custom size envelopes. Place the original on
the exposure glass and place the envelope in the bypass tray or paper tray.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For
details about the relationship between paper weight and paper thickness and the sizes of envelopes that
can be used, see page 172 "Recommended Paper Sizes and Types".
About handling envelopes, supported envelope types, and how to load envelopes, see page 179
"Envelopes".
• The Duplex function cannot be used with envelopes. If the Duplex function is specified, press [1
sided 2 sided:TtoT] to cancel the setting.
To copy onto custom size envelopes, you must specify the envelope's dimensions. Specify the horizontal
and vertical length of the envelope.
CJF005
: Horizontal
: Vertical
Be sure to include the fully open flap in the horizontal dimension.
Copying onto Envelopes from the Bypass Tray
Before using this function, select [Envelope] for the paper type under [Tray Paper Settings] in User Tools.
For details, see "Tray Paper Settings", Connecting the Machine/ System Settings.
Copying onto Envelopes
101

Ricoh MP 4054 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	40 ppm
Paper Capacity	1, 200 sheets standard, up to 4, 700 sheets maximum
Maximum Paper Size	11" x 17"
Memory	2 GB
Connectivity	Ethernet, USB
Functions	Print, Copy, Scan
Scan Resolution	600 dpi
Fax Transmission Speed	33.6 kbps
Copy Speed	40 ppm (B&W)
Operating System Compatibility	Windows, Mac, Linux