Ricoh MP 4054 Series User Guide

When using direct print from a memory storage device
Message Cause Solution
"Exceeded the limit value for
total data size of the
selected files. Cannot select
more files."
• The size of the selected
file exceeds 1 GB.
• The total size of the
selected files exceeds 1
GB.
Files or groups of files larger than 1 GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds 1
GB, select files separately.
• When the size of the selected file
exceeds 1 GB, print from a
memory storage device using a
function other than the Direct
printing function.
You cannot select files of different
formats at the same time.
"Unable to access the
specified memory storage
device."
• An error occurred
when the machine
accessed the memory
storage device or a file
stored on the memory
storage device.
• An error occurred
when the user used the
Direct printing function
to print from a memory
storage device.
Save the file to a different memory
storage device, and then print again.
Messages Printed on the Error Logs or Reports When You Use the Printer
Function
This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
10. Troubleshooting
214

Ricoh MP 4054 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	40 ppm
Paper Capacity	1, 200 sheets standard, up to 4, 700 sheets maximum
Maximum Paper Size	11" x 17"
Memory	2 GB
Connectivity	Ethernet, USB
Functions	Print, Copy, Scan
Scan Resolution	600 dpi
Fax Transmission Speed	33.6 kbps
Copy Speed	40 ppm (B&W)
Operating System Compatibility	Windows, Mac, Linux