Ricoh MP 4054 Series User Guide

Message Cause Solution
"Stapling capacity
exceeded."
The number of sheets per set
is over the staple capacity.
Check the stapler capacity. For details
about the stapler capacity, see
"Specifications for Internal Finisher
SR3130", "Specifications for Finisher
SR3140", "Specifications for Booklet
Finisher SR3150", "Specifications for
Finisher SR3160", "Specifications for
Booklet Finisher SR3170", or
"Specifications for Internal Finisher
SR3180", Maintenance and
Specifications.
"The selected folder is
locked. Please contact the
file administrator."
An attempt was made to edit
or use a locked folder.
For details about locked folders, see
Security Guide.
• If you set [Memory Full Auto Scan Restart] in [Input / Output] of User Tools to [On], even if the
memory becomes full, the memory overflow message will not be displayed. The machine will make
copies of the scanned originals first, and then automatically proceed to scan and to copy the
remaining originals. In this case, the resulting sorted pages will not be sequential. For details about
Memory Full Auto Scan Restart, see "Input / Output", Copy/ Document Server.
10. Troubleshooting
200

Ricoh MP 4054 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	40 ppm
Paper Capacity	1, 200 sheets standard, up to 4, 700 sheets maximum
Maximum Paper Size	11" x 17"
Memory	2 GB
Connectivity	Ethernet, USB
Functions	Print, Copy, Scan
Scan Resolution	600 dpi
Fax Transmission Speed	33.6 kbps
Copy Speed	40 ppm (B&W)
Operating System Compatibility	Windows, Mac, Linux