Ricoh MP C2011 User Manual

• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the
print side down.
• When printing onto OHP transparencies, remove printed sheets one by one.
1. Press the [User Tools/Counter] key.
CXX005
2. Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size], and then specify the paper size.
4. Press [OK].
5. Press [
Next].
6. Press [Paper Type: Bypass Tray].
7. Select the proper items, according to the paper type you want to specify.
• Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies.
• To load thin or thick paper, press [Do not Display] on the [Paper Type] area, and then select
the appropriate paper thickness in the [Paper Thickness] area.
8. Press [OK].
9. Press the [User Tools/Counter] key.
• We recommend that you use specified OHP transparencies.
8. Adding Paper and Toner
112

Ricoh MP C2011 Specifications

General

Print Technology	Laser
Print Speed (Black)	20 ppm
Print Speed (Color)	20 ppm
Max Print Resolution	1200 x 1200 dpi
Copy Speed (Black)	20 cpm
Copy Speed (Color)	20 cpm
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Paper Output	250 sheets
Duplex Printing	Yes
Processor	600 MHz
Memory (Standard)	1.5 GB
Memory (Maximum)	1.5 GB
Hard Disk Drive (Optional)	250 GB
Power Source	220-240V, 50/60Hz
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Resolution	600 dpi
Functions	Print, Copy, Scan
Zoom	25% to 400%
Scan Speed (Black)	54 ipm
Scan Destinations	Email, Folder, USB
Paper Sizes	A3, A4, A5, B4, B5
Interface	USB 2.0, Ethernet
Network Protocol	TCP/IP, IPv4, IPv6
Operating System Compatibility	Windows, Mac, Linux
First Print Time (Color)	11 seconds or less