Ricoh MP C2011 User Manual

3. Press the [Program] key.
CXV045
4. Press [Program].
5. Press the program number you want to register.
6. Enter the program name.
7. Press [OK].
8. Press [Exit].
• The number of characters you can enter for a program name varies depending on the functions as
follows:
• Copier: 34 characters
• Document Server: 34 characters
• Scanner: 34 characters
• When a specified program is registered as the default, its values become the default settings, which
are displayed without pressing the [Program] key, when modes are cleared or reset, and after the
machine is turned on. See "Changing the Default Functions of the Initial Screen", Convenient
Functions.
• When the paper tray you specified in a program is empty and if there is more than one paper tray
with the same size paper in it, the paper tray prioritized under [Paper Tray Priority: Copier] in the
2. Getting Started
42

Ricoh MP C2011 Specifications

General

Print Technology	Laser
Print Speed (Black)	20 ppm
Print Speed (Color)	20 ppm
Max Print Resolution	1200 x 1200 dpi
Copy Speed (Black)	20 cpm
Copy Speed (Color)	20 cpm
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Paper Output	250 sheets
Duplex Printing	Yes
Processor	600 MHz
Memory (Standard)	1.5 GB
Memory (Maximum)	1.5 GB
Hard Disk Drive (Optional)	250 GB
Power Source	220-240V, 50/60Hz
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Resolution	600 dpi
Functions	Print, Copy, Scan
Zoom	25% to 400%
Scan Speed (Black)	54 ipm
Scan Destinations	Email, Folder, USB
Paper Sizes	A3, A4, A5, B4, B5
Interface	USB 2.0, Ethernet
Network Protocol	TCP/IP, IPv4, IPv6
Operating System Compatibility	Windows, Mac, Linux
First Print Time (Color)	11 seconds or less