Ricoh MP C3504 series User Manual

Message Cause Solution
"Insufficient memory. Reduce
the scanning area."
Scanner memory is
insufficient.
• Reset the scan size.
• Lower the resolution.
• Set with no compression. For
details about the settings, see
TWAIN driver Help.
The problem may be due to the
following:
• Scanning cannot be performed if
large values are set for brightness
when halftone or high resolution is
used. For details about the
relationship between scan
settings, see "Relationship
between Resolution and Scan
Size", Scan.
• If a misfeed occurs, you might not
scan an original. Remove the
misfeed, and then scan the
original again.
"Invalid Winsock version.
Please use version 1.1 or
higher."
You are using an invalid
version of Winsock.
Install the operating system of the
computer or copy Winsock from the
operating system CD-ROM.
"No response from the
scanner."
The machine or client
computer is not connected to
the network correctly.
• Check whether the machine or
client computer is connected to
the network correctly.
• Disable the client computer's own
firewall. For details about firewall,
see Windows Help.
"No response from the
scanner."
The network is crowded. Wait for a while, and then connect to
the network again.
10. Troubleshooting
236

Ricoh MP C3504 series Specifications

General

Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Standard Paper Capacity	1, 200 sheets
Max Paper Capacity	4, 700 sheets
Automatic Duplexing	Yes
Monthly Duty Cycle	150, 000 pages
Functions	Print, Copy, Scan, Fax
Memory (Standard)	2 GB
Copy Resolution	600 dpi
Max Paper Size	A3
Print Speed	35 ppm (A4)
Scan Resolution	600 dpi
Connectivity	Ethernet, USB 2.0, Wi-Fi
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Size	A3, A4, A5, B4, B5
Scan Speed	80 ipm (black) / 80 ipm (color)
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria
Control Panel	10.1-inch Smart Operation Panel
Warm-up Time	21 seconds
Copy Speed	35 pages per minute
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac OS, Linux