Message Causes Solutions
"HDD is full. (Auto)" The hard disk became full
while using the error job
store function to store
Normal Print jobs as Hold
Print files.
Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of
the Temporary Print file and/or the
Stored Print file.
When there is not enough memory
Message Causes Solutions
"84: Error" There is no work area
available for image
processing.
Decrease the number of files sent to the
machine.
"92: Error" Printing was canceled
because [Job Reset] or the
[Stop] key was selected on
the machine's control panel.
Perform the print operation again if
necessary.
When there is a problem with a parameter
Message Causes Solutions
"86: Error" Parameters of the control
code are invalid.
Check the print settings.
When the user lacks privileges to perform an operation
Message Causes Solutions
"No response from the
server. Authentication has
failed."
A timeout occurred while
connecting to the server for
LDAP authentication or
Windows Authentication.
Check the status of the server.
"Printing privileges have not
been set for this document."
The PDF document you have
tried to print has no
privileges to print.
Contact the owner of the document.
Messages Displayed When Using the Printer Function
205
To Next Page
Loading...
Need help?
General
