Ricoh MP W6700

Bypass tray (mainly North America)
Paper type and weight Paper size
Number of sheets
that
can be placed
Plain paper
52.3 - 110 g/m
2
(13.9 - 29.3 lb)
• Engineering
E (34 × 44) , D (22 × 34) , C (17 ×
22) , B (11 × 17) , A (8
1
/
2
× 11)
• Architecture
E (36 × 48) , D (24 × 36) , C (18 ×
24) , B (12 × 18) , A (9 × 12)
1 sheet
Translucent paper
(vellum)
• Engineering
E (34 × 44) , D (22 × 34) , C (17 ×
22) , B (11 × 17) , A (8
1
/
2
× 11)
• Architecture
E (36 × 48) , D (24 × 36) , C (18 ×
24) , B (12 × 18) , A (9 × 12)
1 sheet
Film • Engineering
E (34 × 44) , D (22 × 34) , C (17 ×
22) , B (11 × 17) , A (8
1
/
2
× 11)
• Architecture
E (36 × 48) , D (24 × 36) , C (18 ×
24) , B (12 × 18) , A (9 × 12)
1 sheet
• If you use plain paper in low temperature and fusibility is insufficient, contact your service
representative.
• Load paper into the bypass tray with the print side up.
• You must manually specify the size of custom size paper when loading it on the bypass tray.
• If you load thin paper, load it in the grain direction.
• If you use an FA film in an environment where the temperature is 15 °C or below, fusibility may
deteriorate. If this happens, contact your service representative.
8. Adding Paper and Toner
120