• Press [Scan Settings], and then press [Full Color: Text / Photo] in the [Original Type] tab.
• Press [PDF] under [Send File Type / Name].
5. If necessary, press [Next Original Wait].
6. Specify the destination.
You can specify multiple destinations.
7. To specify the e-mail sender, press [Sender Name], and then press [OK].
8. To use Message Disposition Notification, press [Recept. Notice].
If you select [Recept. Notice], the selected e-mail sender will receive e-mail notification when the e-
mail recipient has opened the e-mail.
9. Place the originals.
If scanning does not start automatically, press the [Start] key.
Registering an E-mail Destination
1. Press the [Home] key on the top left of the control panel, and press the [Address Book
Management] icon on the [Home] screen.
2. Check that [Program / Change] is selected.
3. Select the name whose e-mail address you want to register.
Press the name key, or enter the registered number using the number keys.
4. Press [Email].
5. Press [Change] under "Email Address".
5. Scan
92
To Next Page
Loading...
