What to do if documents don't print from Ricoh MP 9003 Printer?
If documents and reports do not print, it might be because the paper output tray is full. Remove the prints from the tray. Another reason could be that there is no paper left. In this case, load paper into the printer.
Why does my Ricoh MP 9003 Printer keep misfeeding?
Frequent misfeeds can occur for several reasons: * Using curled paper can cause misfeeds. Try to straighten out the curl or load the paper upside down so that the curled edges face downward. * The tray's side or end fences may not be set properly. Ensure that the side or end fences are correctly set and locked. * Copy paper size setting is not correct. * There is a foreign object on the output tray. Do not place anything on the output tray. * There is a foreign object on the finisher tray. Do not place anything on the finisher tray. * The staple cartridge is not set correctly. Set the staple cartridge properly.
What to do if a Ricoh MP 9003 error has occurred?
If an error has occurred, a function with the status "Error Occurred" will appear in the [Check Status] screen. Press [Check] for the function where the error occurred, read the displayed message, and take the appropriate action. You can use other functions normally.
How to fix Ricoh MP 9003 network connection error?
If the Ricoh printer cannot connect to the network, a network error might have occurred. Check that the printer is correctly connected to the network and that the settings are correct.
What to do if Ricoh Printer error message persists after removing misfed paper?
If an error message is still displayed after removing misfed paper, it's possible that paper is still jammed in the tray. Remove the jammed paper by following the procedures displayed on the control panel.
Why can't I print in duplex mode on my Ricoh MP 9003 Printer?
If you cannot print in duplex mode, it may be because you have selected a paper tray that is not set for duplex printing. Change the setting for "Apply Duplex" in "Tray Paper Settings" to enable duplex printing for the paper tray. Another reason might be that you have selected a paper type that cannot be used for duplex printing. In "Tray Paper Settings", select a paper type that can be used for duplex printing.
What to do if Ricoh Printer shows error after closing the cover?
If an error message is still displayed even after the indicated cover is closed, one or more of the covers that are not indicated may still be open. Ensure that all the covers of the machine are closed.
Why are images printing on the reverse side of the paper with my Ricoh MP 9003 Printer?
If images are printed on the reverse side of the paper, you may have loaded the paper incorrectly. Load the paper correctly.
Why does only the copier icon appear on my Ricoh Printer?
If, when the printer is turned on, the only icon that appears on the home screen is the [Copier] icon, it means that functions other than the copier function are not yet ready. Wait a little longer.
What to do if the Ricoh Printer display panel is not responding?
If nothing happens when the display panel is touched, the power may be turned off. Make sure the main power indicator is off, and then turn on the power.
Step-by-step guide for making standard copies using the machine.
Learn the fundamental steps for sending faxes via memory transmission.
Detailed steps for performing regular printing tasks.
Steps for scanning documents directly to a network folder.
How to scan documents and send them as email attachments.
Procedure for saving scanned documents to the machine's hard disk.
Instructions and precautions for loading various paper types into trays.
Procedures and precautions for replacing toner cartridges.
Explains the meaning of status icons and how to resolve related issues.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Duplex Printing | Standard |
| Standard Features | Print, Copy, Scan |
| Memory (RAM) | 2 GB |
| Hard Disk Drive | 320 GB |
| Copy Resolution | 600 x 600 dpi |
| Print Speed | 90 ppm |
| Paper Capacity | 8, 300 sheets maximum |
| Paper Size | A3, A4, A5, B4, B5 |
| Paper Weight | 52 to 300 g/m² |
| Optional Features | Fax, Additional Paper Trays, Finisher Options |
| Power Source | AC 220-240V, 50/60Hz |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 90 ppm |
| Fax Resolution | 200 x 200 dpi |
| Network Connectivity | Ethernet |
To Next Page