Ricoh MP 9003 Series User Manual

Loading Paper into the Large Capacity Tray
• (mainly Europe and Asia)
• The LCT can hold A4 paper only. If you want to print on 8
1
/
2
× 11 or B5 JIS from the LCT,
contact your service representative.
• (mainly North America)
• The LCT can hold 8
1
/
2
× 11 paper only. If you want to print on A4 or B5 JIS from the LCT,
contact your service representative.
• The extension unit is required to load A4 , B4 JIS , 8
1
/
2
× 14 , or 8
1
/
2
× 11 .
1. Open the top cover of the LCT.
DPZ015
2. Load paper into the paper tray with the print side up and place it against the left side of
the tray.
Do not stack paper over the limit mark.
DPZ026
3. Press the [Down] key.
The key blinks while the bottom plate is moving down.
9. Adding Paper and Toner
156

Ricoh MP 9003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Standard Features	Print, Copy, Scan
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Paper Capacity	8, 300 sheets maximum
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Optional Features	Fax, Additional Paper Trays, Finisher Options
Power Source	AC 220-240V, 50/60Hz
Scan Resolution	600 x 600 dpi
Copy Speed	90 ppm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet