3. Copy
This chapter describes frequently used copier functions and operations. For information not included in
this chapter, see Copy/ Document Server available on our website.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
About placing the original on the exposure glass, see page 69 "Placing Originals on the Exposure
Glass".
About placing the original in the ADF, see page 69 "Placing Originals in the Auto Document Feeder".
To copy onto paper other than plain paper, specify the paper type in User Tools according to the weight
of the paper you are using. For details, see "Tray Paper Settings", Connecting the Machine/ System
Settings.
When Using the Copy Application
About how to use the application's screen, see page 43 "[Copy] Screen".
When Using the Copier (Classic) Application
For details about how to use the Classic Copier function, see page 71 "Basic Procedure
(Classic)".
Basic Procedure (Classic)
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [Copier (Classic)] icon.
3. Make sure that no previous settings remain.
When there are previous settings remaining, press [Reset].
4. Place the originals.
5. Make desired settings.
71
To Next Page
Loading...
Need help?
General
