Ricoh MP W6700

Message Cause Solution
"Exceeded max. number of
alphanumeric characters for
the path."
The maximum number of
specifiable alphanumeric
characters in a path has
been exceeded.
Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/Storage
Function", Scan.
"Exceeded max. number of
alphanumeric characters."
The maximum enterable
number of alphanumeric
characters has been
exceeded.
Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/Storage
Function", Scan.
"Exceeded the maximum
number of OCR jobs that
can be on standby for
storing, please wait. Try
again after storing of the
current job has completed."
The maximum allowable
number of jobs on standby
was exceeded because
large quantities of
documents were stored by
the OCR function.
Up to 100 jobs can be placed on
standby by the OCR function. Scan the
next document after the current jobs
have finished being stored.
"File types have been
automatically set for some
files because multiple files
were selected."
If there are selected stored
documents which cannot be
converted to a specified file
format, those documents are
automatically converted to a
convertible format before
they are transmitted.
For details about the file formats used
to transmit stored documents, see
"Sending a Stored File", Scan.
"Scanner journal is full."
"Please check Scanner
Features."
"Print & Delete Scanner
Journal" in [Scanner
Features] is set to [Do not
Print: Disable Send], and
Scanner Journal is full.
Print or delete Scanner Journal. For
details about Scanner Features, see
"General Settings", Scan.
Messages Displayed When You Use the Scanner Function
151