Ricoh MP W6700 User Manual

Message Cause Solution
"XXX cannot be YYY
because the device
certificate used for the S/
MIME signature is not
currently valid."
(XXX and YYY indicate the
user action.)
The device certificate (S/
MIME) has expired.
A new device certificate (S/MIME)
must be installed. For details about
how to install a device certificate (S/
MIME), see "Protecting
Communication Paths via a Device
Certificate", Security Guide.
"XXX cannot be YYY
because there is a problem
with the device certificate
used for the S/MIME
signature. Check the device
certificate."
(XXX and YYY indicate the
user action.)
There is no device certificate
(S/MIME), or the certificate
is invalid.
For details about the device certificate
(S/MIME), see "Protecting
Communication Paths via a Device
Certificate", Security Guide.
"XXX cannot be YYY
because the Digital
Signature's device certificate
is not currently valid."
(XXX and YYY indicate the
user action.)
The device certificate (PDF
with digital signature or
PDF/A with digital
signature) has expired.
A new device certificate (PDF with
digital signature or PDF/A with digital
signature) must be installed. For details
about how to install a device certificate
(PDF with digital signature or PDF/A
with digital signature), see "Protecting
Communication Paths via a Device
Certificate", Security Guide.
"XXX cannot be YYY
because there is a problem
with the Digital Signature's
device certificate. Check the
device certificate."
(XXX and YYY indicate the
user action.)
There is no device certificate
(PDF with digital signature or
PDF/A with digital
signature), or the certificate
is invalid.
A new device certificate (PDF with
digital signature or PDF/A with digital
signature) must be installed. For details
about how to install a device certificate
(PDF with digital signature or PDF/A
with digital signature), see "Protecting
Communication Paths via a Device
Certificate", Security Guide.
• If an e-mail cannot be sent and a message appears which states that there is a problem with the
device certificate or user certificate, a new certificate must be installed. For details about how to
install a new certificate, see "Protecting Communication Paths via a Device Certificate", Security
Guide.
When Other Messages Appear
167

Ricoh MP W6700 Specifications

General

Warm-up time	120 seconds
Power source	220 - 240 V, 50/60 Hz
Print Speed	6.7 ppm (A1 horizontal)
Resolution	600 dpi
Maximum Print Width	914 mm
Media Types	Plain paper
Connectivity	USB 2.0, Ethernet 10/100/1000 Base-T
Dimensions	1, 250 x 755 x 1, 200 mm
Original Size	24 inches
Memory	512 MB
Paper weight	52 - 110 g/m²
Supported paper sizes	A4 - A0
Paper input capacity	2 rolls