Ricoh MP W6700

1. Select the bypass tray ( ).
2. Press [Paper Size].
3. Press [Custom Size].
4. Enter the horizontal size with the number keys, and then press [ ].
5. Enter the vertical size with the number keys, and then press [ ].
6. Press [Program].
7. Press [Exit].
8. Press [OK] twice.
Recalling the registered custom size
This procedure allows you to recall the settings that have been registered for a custom size paper.
1. Select the bypass tray ( ).
2. Press [Paper Size].
3. Press [Custom Size].
4. Press [Recall].
5. Press [OK] twice.
3. Copy
66