9. Press the wireless LAN icon.
10. Press [Wi-Fi Direct SSID].
11. Press the entry field of [Password:].
12. Enter the password of Wi-Fi Direct, and then press [OK].
13. Turn the machine off and then on.
Configuring Settings Using Web Image Monitor
1. Start your web browser.
2. Enter "http://(machine's IP address or host name)/" in your web browser's URL bar.
Top Page of Web Image Monitor appears.
If the machine's host name has been registered on the DNS server, you can enter it.
3. Click [Network Settings].
4. Click the [Wireless] tab.
5. Enter the encryption key in [WPA Passphrase] under [Wi-Fi Direct Settings].
6. Click [OK].
Enter the administrator password if you have registered the password in [Administrator Tools].
7. Close your web browser.
3. Appendix
22