P C300W/C301W
You can change the encryption key of Wi-Fi Direct by using the control panel or Web Image Monitor.
Configuring Settings Using the Control Panel
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Wireless(Wi-Fi)], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Wi-Fi Dir. PWD], and then press the [OK] key.
5. Press the scroll keys to enter the password of Wi-Fi Direct, and then press the [OK] key.
6. Turn off the machine, and then turn it back on.
Configuring Settings Using Web Image Monitor
1. Start your web browser.
2. Enter "http://(machine's IP address or host name)/" in your web browser's URL bar.
Top Page of Web Image Monitor appears.
If the machine's host name has been registered on the DNS server, you can enter it.
3. Click [Network Settings].
4. Click the [Wireless] tab.
5. Enter the encryption key in [WPA Passphrase] under [Wi-Fi Direct Settings].
6. Click [OK].
Enter the administrator password if you have registered the password in [Administrator Tools].
7. Close your web browser.
How to Change the Encryption Key of Wi-Fi Direct
23