Ricoh P C301W - Page 84

Paper Size: Tray 2
Specifies the paper size for Tray 2.
This setting appears only when the optional paper feed unit is installed.
Default: (mainly Europe and Asia) [A4], (mainly North America) [8
1
/
2
×
11]
• A4, 8
1
/
2
× 11
Paper Size: Bypass Tray
Specifies the paper size for the bypass tray.
Default: (mainly Europe and Asia) [A4], (mainly North America) [8
1
/
2
×
11]
• A4, A5 SEF, A5 LEF, A6, B5 JIS, B6 JIS, 8
1
/
2
× 14, 8
1
/
2
× 13, 8
1
/
2
× 11, 8
1
/
4
× 13, 8 ×
13, 5
1
/
2
× 8
1
/
2
, 7
1
/
4
× 10
1
/
2
, 8
1
/
2
× 13
2
/
5
, 8
1
/
2
× 13
3
/
5
, 4
1
/
8
× 9
1
/
2
, 3
7
/
8
×
7
1
/
2
, C5 Env, C6 Env, DL Env, 16K, Custom Size
Bypass Tray Priority
Specifies how print jobs using the bypass tray are handled.
Default: [Driver/Command]
• Machine Setting(s)
The paper settings configured on the machine's control panel are applied to all print jobs. An
error occurs when the paper settings specified by the printer driver or the print command do
not match the machine's settings.
• Driver/Command
When executing a print job specifying the paper tray, the paper settings specified in the
printer driver or in the print command are applied regardless of the machine's settings.
• Any Size/Type
Printing proceeds even if the paper size/type settings of the printer and printer driver do not
match. However, if the paper is too small for the print job, the printed image will be cropped.
• Any Custom Size/Type
The printer prints custom size print jobs according to the printer driver’s settings and prints
standard size print jobs according to the printer's settings.
For custom size print jobs, printing proceeds even if the paper size/type settings of the printer
and printer driver do not match. However, if the paper is too small for the print job, the printed
image will be cropped.
For standard size print jobs, an error will occur if the paper size/type settings of the printer
and printer driver do not match.
Paper Tray Priority
Specifies the tray that the machine uses first for print jobs from Tray 1 or Tray 2.
4. Configuring the Machine Using the Control Panel
82