Network Settings
Wired (Ethernet)
• MAC Address
Displays the machine's MAC address.
• Ethernet Speed
Displays the current Ethernet speed setting.
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
• Ethernet Unavailable
Appears when a network cable is not connected.
• Set Ethernet Speed
Specifies the speed for Ethernet communication. Select a speed that matches your network
environment.
For most networks, the default setting is the optimum setting.
Default: [Auto Select]
• Auto Select
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
Wireless (Wi-Fi)
• Enable Wireless (Wi-Fi)
Select whether to enable or disable Wireless LAN.
If [Disable] is set, [Wireless (Wi-Fi) Status], [MAC Address], [Current Connection], [Input
SSID], [WPS], [Wi-Fi Direct], [Wi-Fi Dir. PWD], and [Wi-Fi Direct Type] are not displayed.
Default: [Disable]
• Disable
• Enable
• Wireless (Wi-Fi) Status
Displays the current connection status.
• MAC Address
4. Configuring the Machine Using the Control Panel
84
To Next Page
Loading...
