• When [Wireless] is set to [Active], [Wireless LAN Settings] appears and you can change the
settings there.
• If you are configuring the connection settings manually, check the SSID, authentication method, or
encryption key of the access point or wireless router in advance.
Wi-Fi Direct Settings
Item Description
Wi-Fi Direct Type Select 2.4 GHz or 5 GHz as the wireless LAN frequency.
SSID Enter the SSID name.
The SSID can contain up to 32 characters.
WPA Passphrase Enter the passphrase for Wi-Fi Direct connection. You can enter 8 to 32
characters for a passphrase.
• When [Wireless] is set to [Active], [Wi-Fi Direct Settings] appears and you can change the settings
there.
Certificate Tab
You can use the following two types of certificates on this machine:
• Certificates created by the machine.
• Certificates issued by certification authorities.
You can install only one certificate on the machine.
If you execute [Create New Self-Signed Certificate], [Create Certificate Request], [Install Certificate], or
[Import Certificate and Private Key], the existing certificate on the machine is deleted.
Follow the procedure below to set items:
1. Check the item you want to set.
2. Enter the password.
3. Click [Next].
Certificate
Item Description
Create New Self-
Signed Certificate
Select this item to create a new self-signed certificate.
5. Configuring the Machine Using Utilities
120
To Next Page
Loading...
