48
English
User Settings
3D
3D
Auto: When a HDMI 1.4a 3D timing identication signal is de-
tected, the 3D image is selected automatically.
Choose “On” to enable 3D function.
Choose “Off” to disable 3D function.
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute “Invert” to get best match of left/
right image sequence to get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame
Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame Sequen-
tial”, and “Field Sequential”.
1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D
glasses in the1080p @ 24 frame packing.
“Frame Packing”
is supported the
DLP Link 3D input
signals from VGA
/ HDMI connector.
“Frame Se-
quential” / “Field
Sequential”
are supported
the HQFS 3D
input signals from
Composite/S-
Video connector
connector.
“Frame Pack-
ing” / “Side-by-
Side(Half)” / “Top
and Bottom” are
supported from
HDMI 1.4a 3D
input signals.
To Next Page
Loading...
Need help?
General
