To Next PageTo Next PageWhat to do if the Ricoh PJ X3340N lamp turned off during operation?
If your Ricoh Projector lamp turns off during operation or doesn't turn on, it could be due to overheating, the lamp's service life expiring, or a malfunction. Try disconnecting the power cord, waiting a while, and then turning the projector back on. If the lamp is burnt out, it needs replacement.
Why does my Ricoh Projector display a temperature error and shut off?
If the Ricoh Projector displays a "Temperature Error" and turns off, it could be due to overheating or use in a high-temperature environment. Ensure that the projector's intake and exhaust vents are not blocked to allow proper ventilation. Then, disconnect the power cord, wait for a while, and turn the projector on again.
How do I fix a dark image on my Ricoh PJ X3340N?
To address a dark image on your Ricoh Projector: * Check the settings of [Brightness] and [Contrast] in [Image Adjustment]. * Make sure the lamp is not near the end of its service life. * Check the settings of [RGB Input Range] in [Image Adjustment]. * Make sure [3D Projection] in [Display Settings] is set to [Off].
What to do if my Ricoh Projector lamp turns off or doesn't turn on?
If the lamp in your Ricoh Projector turns off or doesn't turn on, it could be due to overheating, the lamp's service life expiring, or a malfunction. Disconnect the power cord, wait a while, and then turn the projector on again. If the lamp burns out, replace it with a new one.
How do I fix a faded color or poor tint on my Ricoh PJ X3340N?
General| Resolution | XGA (1024 x 768) |
|---|---|
| Projection Lens Zoom Ratio | 1.2x |
| Screen Size | 30 - 300 inches |
| Connectivity/Input Ports | HDMI, VGA, S-Video, Audio In |
| Output Ports | VGA, Audio Out |
| Video Compatibility | NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Network | RJ-45 (LAN) |
| Power Consumption | 0.5 W (Standby) |
